English
German
Services & Experience
RECENTLY COMPLETED JOBS UPDATED
Tue, 07 Feb 2012
06.02.2012
Completed following UT Measurement Surveys in the period from 18.01.2012 to 06.02.2012:
- 14 year Intermediate Class Docking of Cement Tanker
- 33 year Intermediate Class Docking of General Cargo Vessel
- 20 year 4th Class Renewal Docking of RORO-Ferry
13.01.2012
Overhauled Coupling-switches and main breakers for Shaft Generator as well as adjusted and calibrated Pitch Control from Bridge in service. Equipment Manufacturers Lips and Siemens.
08.12.2011
Overhaul of SKL 8VD 26/20 AL-Z carried out at Luanda Anchorage with a team of 1 x Supervising Engineer and 1 x Fitter/Mechanic completed within 3 working days.
08.12.2011
Development of MLC Manual in conjunction with clients existing SMS or Crewing Manual.
09.11.2011
Repair of Emergency Starter and Battery Charging Equipment of Emergency Generator.
17.10.2011
Complete overhaul of MAN B&W 6L 60MCC
17.10.2011
3rd Class UTTM carried out under GL at GIBDOCK Gibraltar
14.10.2011
Exchange of outer Bearing including Cover of Piller NKT 450/4. The job also included dismounting and mounting of the Generator as well as the alignment and testing of the Generator.
23.09.2011
Repair of damaged MaK 9M32. All Units including connecting rod bearing replaced or repaired as required.
13.09.2011
Complete overhaul including bearings of SKL Type VDS 29/24. The works were completed in 4 days including travel. Our team consisted of 1 Engineer and 1 Fitter.
02.09.2011
Supervision and budgeting of a 1st Class Docking for a 7400 tdw MPC
26.08.2011
HFO leak detection and repair. Leak to cargo hold detected on a Fuel Transferpipe. Temporary repair carried out. Tasks and parts for final repair specified and preventive measures advised.
22.08.2011
UT Measurements for 3rd Class renewal of a 8000 tdw MPC, under GL, completed at Algeciras Ship Yard
13.08.2011
Supervision and bugeting of a 2nd Class Docking for a 4400 tdw MPC icluding Ultrasonic Thickness Measurements under GL
01.08.2011
Complete overhaul of MaK 8M453, including bearings and T/C's
09.07.2011
Complete overhaul of 2 x Turbo Charger of MaK 6M20 T/C type ATL and overhaul of 2 Cylinder Units of DMR Sulzer 7 RTA 62U
14.02.2011
Overhaul of Caterpillar Auxiliary Engine Type 4TB04787.
18.03.2011
Supervision and bugeting of a 3rd Class Docking for a 4400 tdw MPC
24.03.2011
Assembly and Alignment of Auxiliary Engine DEUTZ TBD 616 V12.
Assembly and Alignment of generator AVK Type DSG 624M204.
16.04.2011/30.05.2011
2 x Main overhaul of MAK 6M20 Auxiliary Engine.
07.05.2011
Main overhaul and repair of Auxiliary Engine SKL Type 8VDS 29/24 Al-2.
09.05.2011
Supervision and budgeting of 1st class docking of 7000 TDW MPC.
11.05.2011
Ultrasonic thickness measurement and supervision and budgeting of 3rd class docking of a 500 TEU open top Container vessel
11.06.2011
Supervision and budgeting of 3rd class docking of 7000 TDW MPC and ultrasonic thikness measurement.
27.06.2011
Installation and alignment of new Auxiliary Engine SKL Diesel Type 8VDS 29/24 and generator.
Subscribe to RSS Feed